DVSA Statistics
2020 Mazda Gf-Sgew
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2020 Mazda Gf-Sgew (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2020 Mazda Gf-Sgew
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Why Trust This Data?
Official UK Government Source
This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.
Understanding the Statistics
This page is based on 2 MOT tests from the 2023 DVSA dataset. Your 2020 Mazda Gf-Sgew was 3 years old when this data was collected and is now 6 years old.
Sample Size
Limited data - 2 tests (use as rough guide only)
Limitations
Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mazda Gf-Sgew.
Frequently Asked Questions
Is a 2020 Mazda Gf-Sgew likely to fail its MOT?
Based on DVSA statistics, the 2020 Mazda Gf-Sgew has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2020 Mazda Gf-Sgew?
The most common MOT failure reasons for a 2020 Mazda Gf-Sgew are: a brake lining or pad contaminated with oil, grease etc, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2020 Mazda Gf-Sgew fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a brake lining or pad contaminated with oil, grease etc, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2020 Mazda Gf-Sgews fail their MOT?
Around 50% of 2020 Mazda Gf-Sgews fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a brake lining or pad contaminated with oil, grease etc and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 2020 Mazda Gf-Sgew MOT?
Before your 2020 Mazda Gf-Sgew MOT, check these commonly-failed items: a brake lining or pad contaminated with oil, grease etc, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is so weakened that control of the vehicle is likely to be adversely affected. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2020 Mazda Gf-Sgew reliable for MOT?
With a 50% MOT pass rate, the 2020 Mazda Gf-Sgew performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.