DVSA Statistics
2012 Mazda Montrose
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2012 Mazda Montrose (only 1 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 1 DVSA anonymised MOT tests · About this data
Pass Rate
0%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 1 recorded tests.
Pre-MOT Checklist for 2012 Mazda Montrose
Based on common failure points for this model, check these items before your MOT:
- 1
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mazda Montrose.
Frequently Asked Questions
Is a 2012 Mazda Montrose likely to fail its MOT?
Based on DVSA statistics, the 2012 Mazda Montrose has a 0% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2012 Mazda Montrose?
The most common MOT failure reasons for a 2012 Mazda Montrose are: body, cab or chassis excessively corroded at a mounting point, the aim of a headlamp is not within limits laid down in the requirements, warning device shows system malfunction. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2012 Mazda Montrose fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: body, cab or chassis excessively corroded at a mounting point, the aim of a headlamp is not within limits laid down in the requirements, warning device shows system malfunction. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2012 Mazda Montroses fail their MOT?
Around 100% of 2012 Mazda Montroses fail their MOT test, meaning roughly 1 in 1 don't pass first time. The most common reasons are body, cab or chassis excessively corroded at a mounting point and the aim of a headlamp is not within limits laid down in the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 2012 Mazda Montrose MOT?
Before your 2012 Mazda Montrose MOT, check these commonly-failed items: body, cab or chassis excessively corroded at a mounting point, the aim of a headlamp is not within limits laid down in the requirements, warning device shows system malfunction. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2012 Mazda Montrose reliable for MOT?
With a 0% MOT pass rate, the 2012 Mazda Montrose performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.