Skip to content
MOTCHECK
Beta

DVSA Statistics

2007 Mazda Mpv
MOT Pass Rate & Pre-MOT Checklist

Used 2007 Mazda Mpvs usually pass their MOT, but around 1 in 4 still fail, most often for the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced and significant brake effort recorded with no brake applied indicating a binding brake. Based on 81 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.

71.6%

Pass Rate

Based on 81 DVSA anonymised MOT tests · About this data

Pass Rate

71.6%

About average

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:Significant brake effort recorded with no brake applied indicating a binding brake
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    21.4%
  2. 2

    Vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced

    4.8%
  3. 3

    Significant brake effort recorded with no brake applied indicating a binding brake

    4.3%
  4. 4

    A suspension pin, bush or joint excessively worn

    4.3%
  5. 5

    A headlamp or light source missing, inoperative or more than ½ not functioning in the case of LED

    3.7%

Based on DVSA statistics from 81 recorded tests.

Pre-MOT Checklist for 2007 Mazda Mpv

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

  • 3

    Test all headlights work and aim is correct - check for condensation inside

    Lighting – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mazda Mpv.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2007 Mazda Mpv likely to fail its MOT?

Based on DVSA statistics, the 2007 Mazda Mpv has a 71.6% MOT pass rate. This is about average for vehicles of this age.

What are the most common MOT failures on a 2007 Mazda Mpv?

The most common MOT failure reasons for a 2007 Mazda Mpv are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, significant brake effort recorded with no brake applied indicating a binding brake. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2007 Mazda Mpv fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, significant brake effort recorded with no brake applied indicating a binding brake. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2007 Mazda Mpvs fail their MOT?

Around 28% of 2007 Mazda Mpvs fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Pre-checking these items can significantly improve your chances.

What should I check before my 2007 Mazda Mpv MOT?

Before your 2007 Mazda Mpv MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, significant brake effort recorded with no brake applied indicating a binding brake. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2007 Mazda Mpv reliable for MOT?

With a 71.6% MOT pass rate, the 2007 Mazda Mpv performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.