DVSA Statistics
1996 Mazda Mx-3
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1996 Mazda Mx-3 (only 38 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 38 DVSA anonymised MOT tests · About this data
Pass Rate
73.7%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 38 recorded tests.
Pre-MOT Checklist for 1996 Mazda Mx-3
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
How Does This Compare to Other Years?
Previous Year
1995 Mazda Mx-3
Based on 23 UK MOT tests
Next Year
1997 Mazda Mx-3
Based on 69 UK MOT tests
The 1996 model has a lower pass rate than 1995, but performs better than 1997.
Why Trust This Data?
Official UK Government Source
This data comes from the UK's Driver and Vehicle Standards Agency (DVSA), the official body responsible for MOT testing standards. The anonymised MOT test data is published via data.gov.uk.
Understanding the Statistics
This page is based on 38 MOT tests from the 2023 DVSA dataset. Your 1996 Mazda Mx-3 was 27 years old when this data was collected and is now 30 years old.
Sample Size
Limited data - 38 tests (use as rough guide only)
Limitations
Statistics reflect average outcomes and don't account for maintenance history, mileage, or regional variations. Individual results will vary based on how well a vehicle has been maintained.
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mazda Mx-3.
Frequently Asked Questions
Is a 1996 Mazda Mx-3 likely to fail its MOT?
Based on DVSA statistics, the 1996 Mazda Mx-3 has a 73.7% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 1996 Mazda Mx-3?
The most common MOT failure reasons for a 1996 Mazda Mx-3 are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension component excessively damaged or corroded, brake disc or drum excessively weakened, insecure or fractured. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1996 Mazda Mx-3 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension component excessively damaged or corroded, brake disc or drum excessively weakened, insecure or fractured. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1996 Mazda Mx-3s fail their MOT?
Around 26% of 1996 Mazda Mx-3s fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and a suspension component excessively damaged or corroded. Pre-checking these items can significantly improve your chances.
What should I check before my 1996 Mazda Mx-3 MOT?
Before your 1996 Mazda Mx-3 MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension component excessively damaged or corroded, brake disc or drum excessively weakened, insecure or fractured. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1996 Mazda Mx-3 reliable for MOT?
With a 73.7% MOT pass rate, the 1996 Mazda Mx-3 performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.