DVSA Statistics
2013 Mazda Mx5
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2013 Mazda Mx5 (only 12 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 12 DVSA anonymised MOT tests · About this data
Pass Rate
83.3%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 12 recorded tests.
Pre-MOT Checklist for 2013 Mazda Mx5
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mazda Mx5.
Frequently Asked Questions
Is a 2013 Mazda Mx5 likely to fail its MOT?
Based on DVSA statistics, the 2013 Mazda Mx5 has a 83.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2013 Mazda Mx5?
The most common MOT failure reasons for a 2013 Mazda Mx5 are: a suspension component excessively damaged or corroded, a brake lining or pad worn below 1.5mm, lambda coefficient outside the default limits or the range specified by the manufacturer. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2013 Mazda Mx5 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension component excessively damaged or corroded, a brake lining or pad worn below 1.5mm, lambda coefficient outside the default limits or the range specified by the manufacturer. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2013 Mazda Mx5s fail their MOT?
Around 17% of 2013 Mazda Mx5s fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are a suspension component excessively damaged or corroded and a brake lining or pad worn below 1.5mm. Pre-checking these items can significantly improve your chances.
What should I check before my 2013 Mazda Mx5 MOT?
Before your 2013 Mazda Mx5 MOT, check these commonly-failed items: a suspension component excessively damaged or corroded, a brake lining or pad worn below 1.5mm, lambda coefficient outside the default limits or the range specified by the manufacturer. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2013 Mazda Mx5 reliable for MOT?
With a 83.3% MOT pass rate, the 2013 Mazda Mx5 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.