DVSA Statistics
2009 Mazda Sl3
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2009 Mazda Sl3 (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2009 Mazda Sl3
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mazda Sl3.
Frequently Asked Questions
Is a 2009 Mazda Sl3 likely to fail its MOT?
Based on DVSA statistics, the 2009 Mazda Sl3 has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2009 Mazda Sl3?
The most common MOT failure reasons for a 2009 Mazda Sl3 are: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, excessive fluctuation in brake effort through each wheel revolution., lamp showing red light to the front, white light to the rear or has heavily reduced light intensity. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2009 Mazda Sl3 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, excessive fluctuation in brake effort through each wheel revolution., lamp showing red light to the front, white light to the rear or has heavily reduced light intensity. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2009 Mazda Sl3s fail their MOT?
Around 50% of 2009 Mazda Sl3s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced and excessive fluctuation in brake effort through each wheel revolution.. Pre-checking these items can significantly improve your chances.
What should I check before my 2009 Mazda Sl3 MOT?
Before your 2009 Mazda Sl3 MOT, check these commonly-failed items: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, excessive fluctuation in brake effort through each wheel revolution., lamp showing red light to the front, white light to the rear or has heavily reduced light intensity. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2009 Mazda Sl3 reliable for MOT?
With a 50% MOT pass rate, the 2009 Mazda Sl3 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.