Skip to content
MOTCHECK
Beta

DVSA Statistics

1995 Mazda Unclassified
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 1995 Mazda Unclassified (only 29 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

69%

Pass Rate

Based on 29 DVSA anonymised MOT tests · About this data

Pass Rate

69%

About average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    17%
  2. 2

    Vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced

    12.8%
  3. 3

    An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning

    7.4%
  4. 4

    A suspension pin, bush or joint excessively worn

    7.4%
  5. 5

    A spring or spring component fractured or seriously weakened

    5.3%

Based on DVSA statistics from 29 recorded tests.

Pre-MOT Checklist for 1995 Mazda Unclassified

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Test front and rear fog lights work - check warning light on dashboard

    Lighting – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mazda Unclassified.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1995 Mazda Unclassified likely to fail its MOT?

Based on DVSA statistics, the 1995 Mazda Unclassified has a 69% MOT pass rate. This is about average for vehicles of this age.

What are the most common MOT failures on a 1995 Mazda Unclassified?

The most common MOT failure reasons for a 1995 Mazda Unclassified are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1995 Mazda Unclassified fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1995 Mazda Unclassifieds fail their MOT?

Around 31% of 1995 Mazda Unclassifieds fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Pre-checking these items can significantly improve your chances.

What should I check before my 1995 Mazda Unclassified MOT?

Before your 1995 Mazda Unclassified MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, an obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1995 Mazda Unclassified reliable for MOT?

With a 69% MOT pass rate, the 1995 Mazda Unclassified performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.