DVSA Statistics
2006 Mazda Unclassified
MOT Pass Rate & Pre-MOT Checklist
Used 2006 Mazda Unclassifieds usually pass their MOT, but around 1 in 3 still fail, most often for the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users and vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Based on 114 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 114 DVSA anonymised MOT tests · About this data
Pass Rate
69.3%
About average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 114 recorded tests.
Pre-MOT Checklist for 2006 Mazda Unclassified
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mazda Unclassified.
Frequently Asked Questions
Is a 2006 Mazda Unclassified likely to fail its MOT?
Based on DVSA statistics, the 2006 Mazda Unclassified has a 69.3% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2006 Mazda Unclassified?
The most common MOT failure reasons for a 2006 Mazda Unclassified are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2006 Mazda Unclassified fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2006 Mazda Unclassifieds fail their MOT?
Around 31% of 2006 Mazda Unclassifieds fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Pre-checking these items can significantly improve your chances.
What should I check before my 2006 Mazda Unclassified MOT?
Before your 2006 Mazda Unclassified MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2006 Mazda Unclassified reliable for MOT?
With a 69.3% MOT pass rate, the 2006 Mazda Unclassified performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.