DVSA Statistics
2012 Mercedes A160
MOT Pass Rate & Pre-MOT Checklist
Used 2012 Mercedes A160s usually pass their MOT, but around 1 in 6 still fail, most often for brake pipe damaged or excessively corroded, service brake efficiency below minimum requirement and a brake lining or pad worn below 1.5mm. Based on 77 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.
Pass Rate
Based on 77 DVSA anonymised MOT tests · About this data
Pass Rate
84.4%
Higher than average
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 77 recorded tests.
Pre-MOT Checklist for 2012 Mercedes A160
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
- 3
Visually inspect coil springs for cracks or broken coils
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mercedes A160.
Frequently Asked Questions
Is a 2012 Mercedes A160 likely to fail its MOT?
Based on DVSA statistics, the 2012 Mercedes A160 has a 84.4% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2012 Mercedes A160?
The most common MOT failure reasons for a 2012 Mercedes A160 are: brake pipe damaged or excessively corroded, service brake efficiency below minimum requirement, a brake lining or pad worn below 1.5mm. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2012 Mercedes A160 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake pipe damaged or excessively corroded, service brake efficiency below minimum requirement, a brake lining or pad worn below 1.5mm. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2012 Mercedes A160s fail their MOT?
Around 16% of 2012 Mercedes A160s fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are brake pipe damaged or excessively corroded and service brake efficiency below minimum requirement. Pre-checking these items can significantly improve your chances.
What should I check before my 2012 Mercedes A160 MOT?
Before your 2012 Mercedes A160 MOT, check these commonly-failed items: brake pipe damaged or excessively corroded, service brake efficiency below minimum requirement, a brake lining or pad worn below 1.5mm. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2012 Mercedes A160 reliable for MOT?
With a 84.4% MOT pass rate, the 2012 Mercedes A160 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.