DVSA Statistics
2013 Mercedes Cla180
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2013 Mercedes Cla180 (only 4 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 4 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 4 recorded tests.
Pre-MOT Checklist for 2013 Mercedes Cla180
Based on common failure points for this model, check these items before your MOT:
- 1
Visually inspect coil springs for cracks or broken coils
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 4
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mercedes Cla180.
Frequently Asked Questions
Is a 2013 Mercedes Cla180 likely to fail its MOT?
Based on DVSA statistics, the 2013 Mercedes Cla180 has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2013 Mercedes Cla180?
The most common MOT failure reasons for a 2013 Mercedes Cla180 are: a spring or spring component fractured or seriously weakened, brake disc or drum excessively weakened, insecure or fractured, tyre tread depth not in accordance with the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2013 Mercedes Cla180 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a spring or spring component fractured or seriously weakened, brake disc or drum excessively weakened, insecure or fractured, tyre tread depth not in accordance with the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2013 Mercedes Cla180s fail their MOT?
Around 50% of 2013 Mercedes Cla180s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a spring or spring component fractured or seriously weakened and brake disc or drum excessively weakened, insecure or fractured. Pre-checking these items can significantly improve your chances.
What should I check before my 2013 Mercedes Cla180 MOT?
Before your 2013 Mercedes Cla180 MOT, check these commonly-failed items: a spring or spring component fractured or seriously weakened, brake disc or drum excessively weakened, insecure or fractured, tyre tread depth not in accordance with the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2013 Mercedes Cla180 reliable for MOT?
With a 50% MOT pass rate, the 2013 Mercedes Cla180 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.