DVSA Statistics
1992 Mercury Capri
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1992 Mercury Capri (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1992 Mercury Capri
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 3
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 4
Ensure number plate lights work and plates are clean and legible
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mercury Capri.
Frequently Asked Questions
Is a 1992 Mercury Capri likely to fail its MOT?
Based on DVSA statistics, the 1992 Mercury Capri has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1992 Mercury Capri?
The most common MOT failure reasons for a 1992 Mercury Capri are: a suspension pin, bush or joint excessively worn, emissions levels exceed default limits, tyre tread depth not in accordance with the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1992 Mercury Capri fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, emissions levels exceed default limits, tyre tread depth not in accordance with the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1992 Mercury Capris fail their MOT?
Around 50% of 1992 Mercury Capris fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and emissions levels exceed default limits. Pre-checking these items can significantly improve your chances.
What should I check before my 1992 Mercury Capri MOT?
Before your 1992 Mercury Capri MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, emissions levels exceed default limits, tyre tread depth not in accordance with the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1992 Mercury Capri reliable for MOT?
With a 50% MOT pass rate, the 1992 Mercury Capri performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.