DVSA Statistics
1956 MG Magnette
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1956 MG Magnette (only 8 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 8 DVSA anonymised MOT tests · About this data
Pass Rate
87.5%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 8 recorded tests.
Pre-MOT Checklist for 1956 MG Magnette
Based on common failure points for this model, check these items before your MOT:
- 1
Visually inspect coil springs for cracks or broken coils
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact MG Magnette.
Frequently Asked Questions
Is a 1956 MG Magnette likely to fail its MOT?
Based on DVSA statistics, the 1956 MG Magnette has a 87.5% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1956 MG Magnette?
The most common MOT failure reasons for a 1956 MG Magnette are: a spring insecurely attached to chassis or axle, a suspension pin, bush or joint excessively worn, parking brake efficiency below minimum requirement. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1956 MG Magnette fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a spring insecurely attached to chassis or axle, a suspension pin, bush or joint excessively worn, parking brake efficiency below minimum requirement. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1956 MG Magnettes fail their MOT?
Around 13% of 1956 MG Magnettes fail their MOT test, meaning roughly 1 in 8 don't pass first time. The most common reasons are a spring insecurely attached to chassis or axle and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 1956 MG Magnette MOT?
Before your 1956 MG Magnette MOT, check these commonly-failed items: a spring insecurely attached to chassis or axle, a suspension pin, bush or joint excessively worn, parking brake efficiency below minimum requirement. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1956 MG Magnette reliable for MOT?
With a 87.5% MOT pass rate, the 1956 MG Magnette performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.