DVSA Statistics
1988 MG Metro
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1988 MG Metro (only 17 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 17 DVSA anonymised MOT tests · About this data
Pass Rate
88.2%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 17 recorded tests.
Pre-MOT Checklist for 1988 MG Metro
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 3
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact MG Metro.
Frequently Asked Questions
Is a 1988 MG Metro likely to fail its MOT?
Based on DVSA statistics, the 1988 MG Metro has a 88.2% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1988 MG Metro?
The most common MOT failure reasons for a 1988 MG Metro are: tyre tread depth not in accordance with the requirements, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1988 MG Metro fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: tyre tread depth not in accordance with the requirements, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1988 MG Metros fail their MOT?
Around 12% of 1988 MG Metros fail their MOT test, meaning roughly 1 in 8 don't pass first time. The most common reasons are tyre tread depth not in accordance with the requirements and the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 1988 MG Metro MOT?
Before your 1988 MG Metro MOT, check these commonly-failed items: tyre tread depth not in accordance with the requirements, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1988 MG Metro reliable for MOT?
With a 88.2% MOT pass rate, the 1988 MG Metro performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.