DVSA Statistics
1998 Mitsubishi 3500
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1998 Mitsubishi 3500 (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Worn tyres are a safety issue and common MOT fail.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1998 Mitsubishi 3500
Based on common failure points for this model, check these items before your MOT:
- 1
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 2
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 3
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mitsubishi 3500.
Frequently Asked Questions
Is a 1998 Mitsubishi 3500 likely to fail its MOT?
Based on DVSA statistics, the 1998 Mitsubishi 3500 has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1998 Mitsubishi 3500?
The most common MOT failure reasons for a 1998 Mitsubishi 3500 are: a tyre seriously damaged, the aim of a headlamp is not within limits laid down in the requirements, a shock absorber damaged to the extent that it does not function or showing signs of severe leakage. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1998 Mitsubishi 3500 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a tyre seriously damaged, the aim of a headlamp is not within limits laid down in the requirements, a shock absorber damaged to the extent that it does not function or showing signs of severe leakage. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1998 Mitsubishi 3500s fail their MOT?
Around 50% of 1998 Mitsubishi 3500s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a tyre seriously damaged and the aim of a headlamp is not within limits laid down in the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 1998 Mitsubishi 3500 MOT?
Before your 1998 Mitsubishi 3500 MOT, check these commonly-failed items: a tyre seriously damaged, the aim of a headlamp is not within limits laid down in the requirements, a shock absorber damaged to the extent that it does not function or showing signs of severe leakage. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1998 Mitsubishi 3500 reliable for MOT?
With a 50% MOT pass rate, the 1998 Mitsubishi 3500 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.