DVSA Statistics
2010 Mitsubishi Barbarian L200
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Mitsubishi Barbarian L200 (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Number plate lights are a quick fix.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2010 Mitsubishi Barbarian L200
Based on common failure points for this model, check these items before your MOT:
- 1
Ensure number plate lights work and plates are clean and legible
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mitsubishi Barbarian L200.
Frequently Asked Questions
Is a 2010 Mitsubishi Barbarian L200 likely to fail its MOT?
Based on DVSA statistics, the 2010 Mitsubishi Barbarian L200 has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2010 Mitsubishi Barbarian L200?
The most common MOT failure reasons for a 2010 Mitsubishi Barbarian L200 are: a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Mitsubishi Barbarian L200 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Mitsubishi Barbarian L200s fail their MOT?
Around 50% of 2010 Mitsubishi Barbarian L200s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc and a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Mitsubishi Barbarian L200 MOT?
Before your 2010 Mitsubishi Barbarian L200 MOT, check these commonly-failed items: a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc, a lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, a rear registration plate lamp or light source missing or inoperative in the case of multiple lamps or light sources. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Mitsubishi Barbarian L200 reliable for MOT?
With a 50% MOT pass rate, the 2010 Mitsubishi Barbarian L200 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.