Skip to content
MOTCHECK
Beta

DVSA Statistics

1998 Mitsubishi Canter
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 1998 Mitsubishi Canter (only 26 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

80.8%

Pass Rate

Based on 26 DVSA anonymised MOT tests · About this data

Pass Rate

80.8%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:Brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    Brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.

    12.1%
  2. 2

    The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired

    9.1%
  3. 3

    Body, cab or chassis excessively corroded at a mounting point

    6.1%
  4. 4

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    6.1%
  5. 5

    A shock absorber damaged to the extent that it does not function or showing signs of severe leakage

    6.1%

Based on DVSA statistics from 26 recorded tests.

Pre-MOT Checklist for 1998 Mitsubishi Canter

Based on common failure points for this model, check these items before your MOT:

  • 1

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

  • 2

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mitsubishi Canter.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1998 Mitsubishi Canter likely to fail its MOT?

Based on DVSA statistics, the 1998 Mitsubishi Canter has a 80.8% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 1998 Mitsubishi Canter?

The most common MOT failure reasons for a 1998 Mitsubishi Canter are: brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle., the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, body, cab or chassis excessively corroded at a mounting point. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1998 Mitsubishi Canter fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle., the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, body, cab or chassis excessively corroded at a mounting point. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1998 Mitsubishi Canters fail their MOT?

Around 19% of 1998 Mitsubishi Canters fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle. and the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.

What should I check before my 1998 Mitsubishi Canter MOT?

Before your 1998 Mitsubishi Canter MOT, check these commonly-failed items: brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle., the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, body, cab or chassis excessively corroded at a mounting point. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1998 Mitsubishi Canter reliable for MOT?

With a 80.8% MOT pass rate, the 1998 Mitsubishi Canter performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.