DVSA Statistics
1997 Mitsubishi Fto
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1997 Mitsubishi Fto (only 10 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 10 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 10 recorded tests.
Pre-MOT Checklist for 1997 Mitsubishi Fto
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mitsubishi Fto.
Frequently Asked Questions
Is a 1997 Mitsubishi Fto likely to fail its MOT?
Based on DVSA statistics, the 1997 Mitsubishi Fto has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1997 Mitsubishi Fto?
The most common MOT failure reasons for a 1997 Mitsubishi Fto are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension component excessively damaged or corroded, emissions levels exceed default limits. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1997 Mitsubishi Fto fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension component excessively damaged or corroded, emissions levels exceed default limits. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1997 Mitsubishi Ftos fail their MOT?
Around 50% of 1997 Mitsubishi Ftos fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and a suspension component excessively damaged or corroded. Pre-checking these items can significantly improve your chances.
What should I check before my 1997 Mitsubishi Fto MOT?
Before your 1997 Mitsubishi Fto MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension component excessively damaged or corroded, emissions levels exceed default limits. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1997 Mitsubishi Fto reliable for MOT?
With a 50% MOT pass rate, the 1997 Mitsubishi Fto performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.