DVSA Statistics
2005 Mitsubishi Gdi V6
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2005 Mitsubishi Gdi V6 (only 1 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 1 DVSA anonymised MOT tests · About this data
Pass Rate
0%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 1 recorded tests.
Pre-MOT Checklist for 2005 Mitsubishi Gdi V6
Based on common failure points for this model, check these items before your MOT:
- 1
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 2
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mitsubishi Gdi V6.
Frequently Asked Questions
Is a 2005 Mitsubishi Gdi V6 likely to fail its MOT?
Based on DVSA statistics, the 2005 Mitsubishi Gdi V6 has a 0% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2005 Mitsubishi Gdi V6?
The most common MOT failure reasons for a 2005 Mitsubishi Gdi V6 are: emissions levels exceed the manufacturer's specified limits, lambda coefficient outside the default limits or the range specified by the manufacturer, exhaust system leaking or insecure. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2005 Mitsubishi Gdi V6 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: emissions levels exceed the manufacturer's specified limits, lambda coefficient outside the default limits or the range specified by the manufacturer, exhaust system leaking or insecure. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2005 Mitsubishi Gdi V6s fail their MOT?
Around 100% of 2005 Mitsubishi Gdi V6s fail their MOT test, meaning roughly 1 in 1 don't pass first time. The most common reasons are emissions levels exceed the manufacturer's specified limits and lambda coefficient outside the default limits or the range specified by the manufacturer. Pre-checking these items can significantly improve your chances.
What should I check before my 2005 Mitsubishi Gdi V6 MOT?
Before your 2005 Mitsubishi Gdi V6 MOT, check these commonly-failed items: emissions levels exceed the manufacturer's specified limits, lambda coefficient outside the default limits or the range specified by the manufacturer, exhaust system leaking or insecure. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2005 Mitsubishi Gdi V6 reliable for MOT?
With a 0% MOT pass rate, the 2005 Mitsubishi Gdi V6 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.