Skip to content
MOTCHECK
Beta

DVSA Statistics

2003 Mitsubishi L300
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2003 Mitsubishi L300 (only 4 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

50%

Pass Rate

Based on 4 DVSA anonymised MOT tests · About this data

Pass Rate

50%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Quick DIY Fix

5 minutes fix
Save Money

Windscreen wipers are easy to replace yourself.

Fixes:Windscreen washers not working or not providing sufficient fluid to clear the windscreen
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    A suspension pin, bush or joint excessively worn

    16.7%
  2. 2

    A shock absorber bush excessively worn

    16.7%
  3. 3

    Fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users

    8.3%
  4. 4

    A transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc

    8.3%
  5. 5

    Windscreen washers not working or not providing sufficient fluid to clear the windscreen

    8.3%

Based on DVSA statistics from 4 recorded tests.

Pre-MOT Checklist for 2003 Mitsubishi L300

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Check windscreen for chips or cracks in the driver view zone (Zone A)

    Visibility – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mitsubishi L300.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2003 Mitsubishi L300 likely to fail its MOT?

Based on DVSA statistics, the 2003 Mitsubishi L300 has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 2003 Mitsubishi L300?

The most common MOT failure reasons for a 2003 Mitsubishi L300 are: a suspension pin, bush or joint excessively worn, a shock absorber bush excessively worn, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2003 Mitsubishi L300 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a suspension pin, bush or joint excessively worn, a shock absorber bush excessively worn, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2003 Mitsubishi L300s fail their MOT?

Around 50% of 2003 Mitsubishi L300s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a suspension pin, bush or joint excessively worn and a shock absorber bush excessively worn. Pre-checking these items can significantly improve your chances.

What should I check before my 2003 Mitsubishi L300 MOT?

Before your 2003 Mitsubishi L300 MOT, check these commonly-failed items: a suspension pin, bush or joint excessively worn, a shock absorber bush excessively worn, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2003 Mitsubishi L300 reliable for MOT?

With a 50% MOT pass rate, the 2003 Mitsubishi L300 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.