DVSA Statistics
2013 Mitsubishi Mpv
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2013 Mitsubishi Mpv (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2013 Mitsubishi Mpv
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 3
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 4
Check brake lights illuminate when pedal is pressed - have someone help you check
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mitsubishi Mpv.
Frequently Asked Questions
Is a 2013 Mitsubishi Mpv likely to fail its MOT?
Based on DVSA statistics, the 2013 Mitsubishi Mpv has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2013 Mitsubishi Mpv?
The most common MOT failure reasons for a 2013 Mitsubishi Mpv are: brake pipe damaged or excessively corroded, emissions test unable to be completed, an induction or exhaust leak that could affect emissions levels. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2013 Mitsubishi Mpv fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake pipe damaged or excessively corroded, emissions test unable to be completed, an induction or exhaust leak that could affect emissions levels. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2013 Mitsubishi Mpvs fail their MOT?
Around 50% of 2013 Mitsubishi Mpvs fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are brake pipe damaged or excessively corroded and emissions test unable to be completed. Pre-checking these items can significantly improve your chances.
What should I check before my 2013 Mitsubishi Mpv MOT?
Before your 2013 Mitsubishi Mpv MOT, check these commonly-failed items: brake pipe damaged or excessively corroded, emissions test unable to be completed, an induction or exhaust leak that could affect emissions levels. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2013 Mitsubishi Mpv reliable for MOT?
With a 50% MOT pass rate, the 2013 Mitsubishi Mpv performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.