Skip to content
MOTCHECK
Beta

DVSA Statistics

1998 Mitsubishi Ralliart Fto
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 1998 Mitsubishi Ralliart Fto (only 5 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

80%

Pass Rate

Based on 5 DVSA anonymised MOT tests · About this data

Pass Rate

80%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:Parking brake efficiency below minimum requirement
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    55.6%
  2. 2

    Emissions levels exceed the manufacturer's specified limits

    22.2%
  3. 3

    Lambda coefficient outside the default limits or the range specified by the manufacturer

    11.1%
  4. 4

    Parking brake efficiency below minimum requirement

    11.1%

Based on DVSA statistics from 5 recorded tests.

Pre-MOT Checklist for 1998 Mitsubishi Ralliart Fto

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Ensure engine is at operating temperature before test - take a good run beforehand

    Emissions – Common fail on this model

  • 3

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mitsubishi Ralliart Fto.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1998 Mitsubishi Ralliart Fto likely to fail its MOT?

Based on DVSA statistics, the 1998 Mitsubishi Ralliart Fto has a 80% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 1998 Mitsubishi Ralliart Fto?

The most common MOT failure reasons for a 1998 Mitsubishi Ralliart Fto are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed the manufacturer's specified limits, lambda coefficient outside the default limits or the range specified by the manufacturer. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1998 Mitsubishi Ralliart Fto fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed the manufacturer's specified limits, lambda coefficient outside the default limits or the range specified by the manufacturer. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1998 Mitsubishi Ralliart Ftos fail their MOT?

Around 20% of 1998 Mitsubishi Ralliart Ftos fail their MOT test, meaning roughly 1 in 5 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and emissions levels exceed the manufacturer's specified limits. Pre-checking these items can significantly improve your chances.

What should I check before my 1998 Mitsubishi Ralliart Fto MOT?

Before your 1998 Mitsubishi Ralliart Fto MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed the manufacturer's specified limits, lambda coefficient outside the default limits or the range specified by the manufacturer. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1998 Mitsubishi Ralliart Fto reliable for MOT?

With a 80% MOT pass rate, the 1998 Mitsubishi Ralliart Fto performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.