Skip to content
MOTCHECK
Beta

DVSA Statistics

1995 Mitsubishi Sho
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 1995 Mitsubishi Sho (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

50%

Pass Rate

Based on 2 DVSA anonymised MOT tests · About this data

Pass Rate

50%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    44.4%
  2. 2

    The strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired

    22.2%
  3. 3

    A suspension pin, bush or joint excessively worn

    11.1%
  4. 4

    Exhaust system leaking or insecure

    11.1%
  5. 5

    Emissions test unable to be completed

    11.1%

Based on DVSA statistics from 2 recorded tests.

Pre-MOT Checklist for 1995 Mitsubishi Sho

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Check exhaust for leaks, holes, or excessive corrosion - listen for blowing

    Exhaust – Common fail on this model

  • 3

    Ensure engine is at operating temperature before test - take a good run beforehand

    Emissions – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mitsubishi Sho.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1995 Mitsubishi Sho likely to fail its MOT?

Based on DVSA statistics, the 1995 Mitsubishi Sho has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 1995 Mitsubishi Sho?

The most common MOT failure reasons for a 1995 Mitsubishi Sho are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1995 Mitsubishi Sho fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1995 Mitsubishi Shos fail their MOT?

Around 50% of 1995 Mitsubishi Shos fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.

What should I check before my 1995 Mitsubishi Sho MOT?

Before your 1995 Mitsubishi Sho MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a suspension pin, bush or joint excessively worn. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1995 Mitsubishi Sho reliable for MOT?

With a 50% MOT pass rate, the 1995 Mitsubishi Sho performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.