DVSA Statistics
2010 Mitsubishi Unclassified
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2010 Mitsubishi Unclassified (only 12 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 12 DVSA anonymised MOT tests · About this data
Pass Rate
91.7%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Based on DVSA statistics from 12 recorded tests.
Pre-MOT Checklist for 2010 Mitsubishi Unclassified
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Mitsubishi Unclassified.
Frequently Asked Questions
Is a 2010 Mitsubishi Unclassified likely to fail its MOT?
Based on DVSA statistics, the 2010 Mitsubishi Unclassified has a 91.7% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2010 Mitsubishi Unclassified?
The most common MOT failure reasons for a 2010 Mitsubishi Unclassified are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a driver's seat with a defective structure. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2010 Mitsubishi Unclassified fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a driver's seat with a defective structure. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2010 Mitsubishi Unclassifieds fail their MOT?
Around 8% of 2010 Mitsubishi Unclassifieds fail their MOT test, meaning roughly 1 in 13 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and a driver's seat with a defective structure. Pre-checking these items can significantly improve your chances.
What should I check before my 2010 Mitsubishi Unclassified MOT?
Before your 2010 Mitsubishi Unclassified MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a driver's seat with a defective structure. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2010 Mitsubishi Unclassified reliable for MOT?
With a 91.7% MOT pass rate, the 2010 Mitsubishi Unclassified performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.