DVSA Statistics
1980 Morris Ital Hl
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1980 Morris Ital Hl (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Windscreen wipers are easy to replace yourself.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1980 Morris Ital Hl
Based on common failure points for this model, check these items before your MOT:
- 1
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 2
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
- 3
Ensure all doors open and close properly and latches engage
Bodywork – Common fail on this model
- 4
Push down on each corner and release - car should bounce once only
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Morris Ital Hl.
Frequently Asked Questions
Is a 1980 Morris Ital Hl likely to fail its MOT?
Based on DVSA statistics, the 1980 Morris Ital Hl has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1980 Morris Ital Hl?
The most common MOT failure reasons for a 1980 Morris Ital Hl are: a wheel bearing with excessive play, emissions levels exceed default limits, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1980 Morris Ital Hl fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a wheel bearing with excessive play, emissions levels exceed default limits, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1980 Morris Ital Hls fail their MOT?
Around 50% of 1980 Morris Ital Hls fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a wheel bearing with excessive play and emissions levels exceed default limits. Pre-checking these items can significantly improve your chances.
What should I check before my 1980 Morris Ital Hl MOT?
Before your 1980 Morris Ital Hl MOT, check these commonly-failed items: a wheel bearing with excessive play, emissions levels exceed default limits, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1980 Morris Ital Hl reliable for MOT?
With a 50% MOT pass rate, the 1980 Morris Ital Hl performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.