Skip to content
MOTCHECK
Beta

DVSA Statistics

2008 Nissan 300zx
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2008 Nissan 300zx (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

50%

Pass Rate

Based on 2 DVSA anonymised MOT tests · About this data

Pass Rate

50%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Worn tyres are a safety issue and common MOT fail.

Fixes:Tyre tread depth not in accordance with the requirements
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    Steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc

    50%
  2. 2

    Tyre tread depth not in accordance with the requirements

    16.7%
  3. 3

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    16.7%
  4. 4

    A lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning

    16.7%

Based on DVSA statistics from 2 recorded tests.

Pre-MOT Checklist for 2008 Nissan 300zx

Based on common failure points for this model, check these items before your MOT:

  • 1

    Check for excessive play in steering wheel - should be minimal free movement

    Steering – Common fail on this model

  • 2

    Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre

    Tyres – Common fail on this model

  • 3

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Nissan 300zx.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2008 Nissan 300zx likely to fail its MOT?

Based on DVSA statistics, the 2008 Nissan 300zx has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 2008 Nissan 300zx?

The most common MOT failure reasons for a 2008 Nissan 300zx are: steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc, tyre tread depth not in accordance with the requirements, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2008 Nissan 300zx fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc, tyre tread depth not in accordance with the requirements, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2008 Nissan 300zxs fail their MOT?

Around 50% of 2008 Nissan 300zxs fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc and tyre tread depth not in accordance with the requirements. Pre-checking these items can significantly improve your chances.

What should I check before my 2008 Nissan 300zx MOT?

Before your 2008 Nissan 300zx MOT, check these commonly-failed items: steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc, tyre tread depth not in accordance with the requirements, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2008 Nissan 300zx reliable for MOT?

With a 50% MOT pass rate, the 2008 Nissan 300zx performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.