Skip to content
MOTCHECK
Beta

DVSA Statistics

1988 Nissan Micra
MOT Pass Rate & Pre-MOT Checklist

Used 1988 Nissan Micras usually pass their MOT, but around 1 in 7 still fail, most often for the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, tyre tread depth not in accordance with the requirements and fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Based on 85 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.

84.7%

Pass Rate

Based on 85 DVSA anonymised MOT tests · About this data

Pass Rate

84.7%

Higher than average

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Worn tyres are a safety issue and common MOT fail.

Fixes:Tyre tread depth not in accordance with the requirements
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    21%
  2. 2

    Tyre tread depth not in accordance with the requirements

    6.2%
  3. 3

    Fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users

    4.9%
  4. 4

    A tyre seriously damaged

    4.9%
  5. 5

    Brake pipe damaged or excessively corroded

    4.9%

Based on DVSA statistics from 85 recorded tests.

Pre-MOT Checklist for 1988 Nissan Micra

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre

    Tyres – Common fail on this model

  • 3

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Nissan Micra.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1988 Nissan Micra likely to fail its MOT?

Based on DVSA statistics, the 1988 Nissan Micra has a 84.7% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 1988 Nissan Micra?

The most common MOT failure reasons for a 1988 Nissan Micra are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, tyre tread depth not in accordance with the requirements, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1988 Nissan Micra fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, tyre tread depth not in accordance with the requirements, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1988 Nissan Micras fail their MOT?

Around 15% of 1988 Nissan Micras fail their MOT test, meaning roughly 1 in 7 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and tyre tread depth not in accordance with the requirements. Pre-checking these items can significantly improve your chances.

What should I check before my 1988 Nissan Micra MOT?

Before your 1988 Nissan Micra MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, tyre tread depth not in accordance with the requirements, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1988 Nissan Micra reliable for MOT?

With a 84.7% MOT pass rate, the 1988 Nissan Micra performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.