DVSA Statistics
2000 Nissan Pulsar
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2000 Nissan Pulsar (only 12 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 12 DVSA anonymised MOT tests · About this data
Pass Rate
91.7%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Windscreen wipers are easy to replace yourself.
Based on DVSA statistics from 12 recorded tests.
Pre-MOT Checklist for 2000 Nissan Pulsar
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 3
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Nissan Pulsar.
Frequently Asked Questions
Is a 2000 Nissan Pulsar likely to fail its MOT?
Based on DVSA statistics, the 2000 Nissan Pulsar has a 91.7% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2000 Nissan Pulsar?
The most common MOT failure reasons for a 2000 Nissan Pulsar are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed default limits, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2000 Nissan Pulsar fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed default limits, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2000 Nissan Pulsars fail their MOT?
Around 8% of 2000 Nissan Pulsars fail their MOT test, meaning roughly 1 in 13 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and emissions levels exceed default limits. Pre-checking these items can significantly improve your chances.
What should I check before my 2000 Nissan Pulsar MOT?
Before your 2000 Nissan Pulsar MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed default limits, windscreen washers not working or not providing sufficient fluid to clear the windscreen. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2000 Nissan Pulsar reliable for MOT?
With a 91.7% MOT pass rate, the 2000 Nissan Pulsar performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.