DVSA Statistics
2006 Noble M400
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2006 Noble M400 (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Windscreen wipers are easy to replace yourself.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2006 Noble M400
Based on common failure points for this model, check these items before your MOT:
- 1
Check windscreen for chips or cracks in the driver view zone (Zone A)
Visibility – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Noble M400.
Frequently Asked Questions
Is a 2006 Noble M400 likely to fail its MOT?
Based on DVSA statistics, the 2006 Noble M400 has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2006 Noble M400?
The most common MOT failure reasons for a 2006 Noble M400 are: windscreen washers not working or not providing sufficient fluid to clear the windscreen, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a shock absorber which has negligible damping effect. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2006 Noble M400 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: windscreen washers not working or not providing sufficient fluid to clear the windscreen, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a shock absorber which has negligible damping effect. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2006 Noble M400s fail their MOT?
Around 50% of 2006 Noble M400s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are windscreen washers not working or not providing sufficient fluid to clear the windscreen and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 2006 Noble M400 MOT?
Before your 2006 Noble M400 MOT, check these commonly-failed items: windscreen washers not working or not providing sufficient fluid to clear the windscreen, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a shock absorber which has negligible damping effect. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2006 Noble M400 reliable for MOT?
With a 50% MOT pass rate, the 2006 Noble M400 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.