DVSA Statistics
1983 Opel Monza
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1983 Opel Monza (only 8 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 8 DVSA anonymised MOT tests · About this data
Pass Rate
75%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 8 recorded tests.
Pre-MOT Checklist for 1983 Opel Monza
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Opel Monza.
Frequently Asked Questions
Is a 1983 Opel Monza likely to fail its MOT?
Based on DVSA statistics, the 1983 Opel Monza has a 75% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1983 Opel Monza?
The most common MOT failure reasons for a 1983 Opel Monza are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a spring or spring component fractured or seriously weakened, brake pipe damaged or excessively corroded. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1983 Opel Monza fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a spring or spring component fractured or seriously weakened, brake pipe damaged or excessively corroded. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1983 Opel Monzas fail their MOT?
Around 25% of 1983 Opel Monzas fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and a spring or spring component fractured or seriously weakened. Pre-checking these items can significantly improve your chances.
What should I check before my 1983 Opel Monza MOT?
Before your 1983 Opel Monza MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a spring or spring component fractured or seriously weakened, brake pipe damaged or excessively corroded. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1983 Opel Monza reliable for MOT?
With a 75% MOT pass rate, the 1983 Opel Monza performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.