Skip to content
MOTCHECK
Beta

DVSA Statistics

1985 Opel Monza
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 1985 Opel Monza (only 21 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

95.2%

Pass Rate

Based on 21 DVSA anonymised MOT tests · About this data

Pass Rate

95.2%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    66.7%
  2. 2

    Fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users

    33.3%

Based on DVSA statistics from 21 recorded tests.

Pre-MOT Checklist for 1985 Opel Monza

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Opel Monza.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1985 Opel Monza likely to fail its MOT?

Based on DVSA statistics, the 1985 Opel Monza has a 95.2% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 1985 Opel Monza?

The most common MOT failure reasons for a 1985 Opel Monza are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1985 Opel Monza fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1985 Opel Monzas fail their MOT?

Around 5% of 1985 Opel Monzas fail their MOT test, meaning roughly 1 in 20 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Pre-checking these items can significantly improve your chances.

What should I check before my 1985 Opel Monza MOT?

Before your 1985 Opel Monza MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1985 Opel Monza reliable for MOT?

With a 95.2% MOT pass rate, the 1985 Opel Monza performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.