Skip to content
MOTCHECK
Beta

DVSA Statistics

1994 Peugeot 106
MOT Pass Rate & Pre-MOT Checklist

Used 1994 Peugeot 106s usually pass their MOT, but around 1 in 4 still fail, most often for the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed the manufacturer's specified limits and a suspension pin, bush or joint excessively worn. Based on 213 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.

75.1%

Pass Rate

Based on 213 DVSA anonymised MOT tests · About this data

Pass Rate

75.1%

About average

Top Failure Reasons

Common MOT failures for this model

Quick DIY Fix

10 minutes fix
Save Money

Indicator bulbs are quick and cheap to replace.

Fixes:A direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    7.2%
  2. 2

    Emissions levels exceed the manufacturer's specified limits

    6.6%
  3. 3

    A suspension pin, bush or joint excessively worn

    5.6%
  4. 4

    A direction indicator lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning

    3.6%
  5. 5

    Exhaust system leaking or insecure

    3.6%

Based on DVSA statistics from 213 recorded tests.

Pre-MOT Checklist for 1994 Peugeot 106

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Ensure engine is at operating temperature before test - take a good run beforehand

    Emissions – Common fail on this model

  • 3

    Test all indicators flash at the correct rate - check front, rear, and side repeaters

    Lighting – Common fail on this model

  • 4

    Check exhaust for leaks, holes, or excessive corrosion - listen for blowing

    Exhaust – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Peugeot 106.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 1994 Peugeot 106 likely to fail its MOT?

Based on DVSA statistics, the 1994 Peugeot 106 has a 75.1% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 1994 Peugeot 106?

The most common MOT failure reasons for a 1994 Peugeot 106 are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed the manufacturer's specified limits, a suspension pin, bush or joint excessively worn. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 1994 Peugeot 106 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed the manufacturer's specified limits, a suspension pin, bush or joint excessively worn. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 1994 Peugeot 106s fail their MOT?

Around 25% of 1994 Peugeot 106s fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and emissions levels exceed the manufacturer's specified limits. Pre-checking these items can significantly improve your chances.

What should I check before my 1994 Peugeot 106 MOT?

Before your 1994 Peugeot 106 MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed the manufacturer's specified limits, a suspension pin, bush or joint excessively worn. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 1994 Peugeot 106 reliable for MOT?

With a 75.1% MOT pass rate, the 1994 Peugeot 106 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.