Skip to content
MOTCHECK
Beta

DVSA Statistics

2006 Peugeot Compass
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2006 Peugeot Compass (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

50%

Pass Rate

Based on 2 DVSA anonymised MOT tests · About this data

Pass Rate

50%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    66.7%
  2. 2

    Vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced

    33.3%

Based on DVSA statistics from 2 recorded tests.

Pre-MOT Checklist for 2006 Peugeot Compass

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Peugeot Compass.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2006 Peugeot Compass likely to fail its MOT?

Based on DVSA statistics, the 2006 Peugeot Compass has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 2006 Peugeot Compass?

The most common MOT failure reasons for a 2006 Peugeot Compass are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2006 Peugeot Compass fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2006 Peugeot Compasss fail their MOT?

Around 50% of 2006 Peugeot Compasss fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Pre-checking these items can significantly improve your chances.

What should I check before my 2006 Peugeot Compass MOT?

Before your 2006 Peugeot Compass MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2006 Peugeot Compass reliable for MOT?

With a 50% MOT pass rate, the 2006 Peugeot Compass performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.