DVSA Statistics
2000 Peugeot Elddis
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2000 Peugeot Elddis (only 3 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 3 DVSA anonymised MOT tests · About this data
Pass Rate
66.7%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Based on DVSA statistics from 3 recorded tests.
Pre-MOT Checklist for 2000 Peugeot Elddis
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 3
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Peugeot Elddis.
Frequently Asked Questions
Is a 2000 Peugeot Elddis likely to fail its MOT?
Based on DVSA statistics, the 2000 Peugeot Elddis has a 66.7% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 2000 Peugeot Elddis?
The most common MOT failure reasons for a 2000 Peugeot Elddis are: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed the manufacturer's specified limits, lambda coefficient outside the default limits or the range specified by the manufacturer. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2000 Peugeot Elddis fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed the manufacturer's specified limits, lambda coefficient outside the default limits or the range specified by the manufacturer. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2000 Peugeot Elddiss fail their MOT?
Around 33% of 2000 Peugeot Elddiss fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and emissions levels exceed the manufacturer's specified limits. Pre-checking these items can significantly improve your chances.
What should I check before my 2000 Peugeot Elddis MOT?
Before your 2000 Peugeot Elddis MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, emissions levels exceed the manufacturer's specified limits, lambda coefficient outside the default limits or the range specified by the manufacturer. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2000 Peugeot Elddis reliable for MOT?
With a 66.7% MOT pass rate, the 2000 Peugeot Elddis performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.