DVSA Statistics
1982 Peugeot J 9
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1982 Peugeot J 9 (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1982 Peugeot J 9
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 3
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Peugeot J 9.
Frequently Asked Questions
Is a 1982 Peugeot J 9 likely to fail its MOT?
Based on DVSA statistics, the 1982 Peugeot J 9 has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1982 Peugeot J 9?
The most common MOT failure reasons for a 1982 Peugeot J 9 are: a flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched, brake performance unable to be tested, service brake pedal has insufficient reserve travel. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1982 Peugeot J 9 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched, brake performance unable to be tested, service brake pedal has insufficient reserve travel. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1982 Peugeot J 9s fail their MOT?
Around 50% of 1982 Peugeot J 9s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched and brake performance unable to be tested. Pre-checking these items can significantly improve your chances.
What should I check before my 1982 Peugeot J 9 MOT?
Before your 1982 Peugeot J 9 MOT, check these commonly-failed items: a flexible brake hose excessively damaged, deteriorated, chafed, twisted or stretched, brake performance unable to be tested, service brake pedal has insufficient reserve travel. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1982 Peugeot J 9 reliable for MOT?
With a 50% MOT pass rate, the 1982 Peugeot J 9 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.