DVSA Statistics
2006 Peugeot Motor Home
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2006 Peugeot Motor Home (only 18 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 18 DVSA anonymised MOT tests · About this data
Pass Rate
83.3%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 18 recorded tests.
Pre-MOT Checklist for 2006 Peugeot Motor Home
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Peugeot Motor Home.
Frequently Asked Questions
Is a 2006 Peugeot Motor Home likely to fail its MOT?
Based on DVSA statistics, the 2006 Peugeot Motor Home has a 83.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2006 Peugeot Motor Home?
The most common MOT failure reasons for a 2006 Peugeot Motor Home are: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a suspension pin, bush or joint excessively worn, a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2006 Peugeot Motor Home fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a suspension pin, bush or joint excessively worn, a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2006 Peugeot Motor Homes fail their MOT?
Around 17% of 2006 Peugeot Motor Homes fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 2006 Peugeot Motor Home MOT?
Before your 2006 Peugeot Motor Home MOT, check these commonly-failed items: vehicle structure corroded to the extent that the rigidity of the assembly is seriously reduced, a suspension pin, bush or joint excessively worn, a transmission shaft constant velocity joint boot missing or no longer prevents the ingress of dirt etc. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2006 Peugeot Motor Home reliable for MOT?
With a 83.3% MOT pass rate, the 2006 Peugeot Motor Home performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.