Skip to content
MOTCHECK
Beta

DVSA Statistics

2008 Piaggio Porter
MOT Pass Rate & Pre-MOT Checklist

Used 2008 Piaggio Porters usually pass their MOT, but around 1 in 4 still fail, most often for brake pipe damaged or excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired and a spring or spring component fractured or seriously weakened. Based on 156 MOT tests from DVSA data, this page shows how this model performs and what to check before your test.

72.4%

Pass Rate

Based on 156 DVSA anonymised MOT tests · About this data

Pass Rate

72.4%

About average

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:Brake pipe damaged or excessively corroded
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    Brake pipe damaged or excessively corroded

    5.5%
  2. 2

    The strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired

    4.9%
  3. 3

    A spring or spring component fractured or seriously weakened

    4.6%
  4. 4

    The aim of a headlamp is not within limits laid down in the requirements

    4.6%
  5. 5

    Exhaust system leaking or insecure

    3.3%

Based on DVSA statistics from 156 recorded tests.

Pre-MOT Checklist for 2008 Piaggio Porter

Based on common failure points for this model, check these items before your MOT:

  • 1

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

  • 2

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 3

    Test all headlights work and aim is correct - check for condensation inside

    Lighting – Common fail on this model

  • 4

    Check exhaust for leaks, holes, or excessive corrosion - listen for blowing

    Exhaust – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Piaggio Porter.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2008 Piaggio Porter likely to fail its MOT?

Based on DVSA statistics, the 2008 Piaggio Porter has a 72.4% MOT pass rate. This is about average for vehicles of this age.

What are the most common MOT failures on a 2008 Piaggio Porter?

The most common MOT failure reasons for a 2008 Piaggio Porter are: brake pipe damaged or excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a spring or spring component fractured or seriously weakened. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2008 Piaggio Porter fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: brake pipe damaged or excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a spring or spring component fractured or seriously weakened. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2008 Piaggio Porters fail their MOT?

Around 28% of 2008 Piaggio Porters fail their MOT test, meaning roughly 1 in 4 don't pass first time. The most common reasons are brake pipe damaged or excessively corroded and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.

What should I check before my 2008 Piaggio Porter MOT?

Before your 2008 Piaggio Porter MOT, check these commonly-failed items: brake pipe damaged or excessively corroded, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, a spring or spring component fractured or seriously weakened. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2008 Piaggio Porter reliable for MOT?

With a 72.4% MOT pass rate, the 2008 Piaggio Porter performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.