Skip to content
MOTCHECK
Beta

DVSA Statistics

2011 Piaggio Typhoon 50 My10
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2011 Piaggio Typhoon 50 My10 (only 8 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

87.5%

Pass Rate

Based on 8 DVSA anonymised MOT tests · About this data

Pass Rate

87.5%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    A shock absorber not functioning or leaking severely

    25%
  2. 2

    Steering head bearings have excessive wear or play

    25%
  3. 3

    A wheel bearing with excessive play

    25%
  4. 4

    Forks or fork yoke fractured, insecure, excessively deformed or excessively corroded

    25%

Based on DVSA statistics from 8 recorded tests.

Pre-MOT Checklist for 2011 Piaggio Typhoon 50 My10

Based on common failure points for this model, check these items before your MOT:

  • 1

    Push down on each corner and release - car should bounce once only

    Suspension – Common fail on this model

  • 2

    Check for excessive play in steering wheel - should be minimal free movement

    Steering – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Piaggio Typhoon 50 My10.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2011 Piaggio Typhoon 50 My10 likely to fail its MOT?

Based on DVSA statistics, the 2011 Piaggio Typhoon 50 My10 has a 87.5% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 2011 Piaggio Typhoon 50 My10?

The most common MOT failure reasons for a 2011 Piaggio Typhoon 50 My10 are: a shock absorber not functioning or leaking severely, steering head bearings have excessive wear or play, a wheel bearing with excessive play. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2011 Piaggio Typhoon 50 My10 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a shock absorber not functioning or leaking severely, steering head bearings have excessive wear or play, a wheel bearing with excessive play. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2011 Piaggio Typhoon 50 My10s fail their MOT?

Around 13% of 2011 Piaggio Typhoon 50 My10s fail their MOT test, meaning roughly 1 in 8 don't pass first time. The most common reasons are a shock absorber not functioning or leaking severely and steering head bearings have excessive wear or play. Pre-checking these items can significantly improve your chances.

What should I check before my 2011 Piaggio Typhoon 50 My10 MOT?

Before your 2011 Piaggio Typhoon 50 My10 MOT, check these commonly-failed items: a shock absorber not functioning or leaking severely, steering head bearings have excessive wear or play, a wheel bearing with excessive play. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2011 Piaggio Typhoon 50 My10 reliable for MOT?

With a 87.5% MOT pass rate, the 2011 Piaggio Typhoon 50 My10 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.