DVSA Statistics
2005 Piaggio X9 500ie
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2005 Piaggio X9 500ie (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2005 Piaggio X9 500ie
Based on common failure points for this model, check these items before your MOT:
- 1
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 3
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
- 4
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 5
Check for excessive play in steering wheel - should be minimal free movement
Steering – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Piaggio X9 500ie.
Frequently Asked Questions
Is a 2005 Piaggio X9 500ie likely to fail its MOT?
Based on DVSA statistics, the 2005 Piaggio X9 500ie has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2005 Piaggio X9 500ie?
The most common MOT failure reasons for a 2005 Piaggio X9 500ie are: a headlamp missing, inoperative or more than â½ not functioning in the case of led, brake lining or pad worn below 1.0mm, tyre tread depth not in accordance with the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2005 Piaggio X9 500ie fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a headlamp missing, inoperative or more than â½ not functioning in the case of led, brake lining or pad worn below 1.0mm, tyre tread depth not in accordance with the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2005 Piaggio X9 500ies fail their MOT?
Around 50% of 2005 Piaggio X9 500ies fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a headlamp missing, inoperative or more than â½ not functioning in the case of led and brake lining or pad worn below 1.0mm. Pre-checking these items can significantly improve your chances.
What should I check before my 2005 Piaggio X9 500ie MOT?
Before your 2005 Piaggio X9 500ie MOT, check these commonly-failed items: a headlamp missing, inoperative or more than â½ not functioning in the case of led, brake lining or pad worn below 1.0mm, tyre tread depth not in accordance with the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2005 Piaggio X9 500ie reliable for MOT?
With a 50% MOT pass rate, the 2005 Piaggio X9 500ie performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.