DVSA Statistics
1990 Porsche 944 S2 Cabrio
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1990 Porsche 944 S2 Cabrio (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Wiper blades are a common fail on 944 S2 CABRIOs. Quick 5-minute fix.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1990 Porsche 944 S2 Cabrio
Based on common failure points for this model, check these items before your MOT:
- 1
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 4
Check tyre tread depth is at least 1.6mm across the central 3/4 of the tyre
Tyres – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Porsche 944 S2 Cabrio.
Frequently Asked Questions
Is a 1990 Porsche 944 S2 Cabrio likely to fail its MOT?
Based on DVSA statistics, the 1990 Porsche 944 S2 Cabrio has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1990 Porsche 944 S2 Cabrio?
The most common MOT failure reasons for a 1990 Porsche 944 S2 Cabrio are: wiper blade missing or obviously not clearing the windscreen, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brake pipe damaged or excessively corroded. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1990 Porsche 944 S2 Cabrio fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: wiper blade missing or obviously not clearing the windscreen, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brake pipe damaged or excessively corroded. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1990 Porsche 944 S2 Cabrios fail their MOT?
Around 50% of 1990 Porsche 944 S2 Cabrios fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are wiper blade missing or obviously not clearing the windscreen and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 1990 Porsche 944 S2 Cabrio MOT?
Before your 1990 Porsche 944 S2 Cabrio MOT, check these commonly-failed items: wiper blade missing or obviously not clearing the windscreen, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, brake pipe damaged or excessively corroded. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1990 Porsche 944 S2 Cabrio reliable for MOT?
With a 50% MOT pass rate, the 1990 Porsche 944 S2 Cabrio performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.