DVSA Statistics
1990 Quantum H4i
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1990 Quantum H4i (only 1 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 1 DVSA anonymised MOT tests · About this data
Pass Rate
0%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 1 recorded tests.
Pre-MOT Checklist for 1990 Quantum H4i
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 3
Ensure all doors open and close properly and latches engage
Bodywork – Common fail on this model
- 4
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Quantum H4i.
Frequently Asked Questions
Is a 1990 Quantum H4i likely to fail its MOT?
Based on DVSA statistics, the 1990 Quantum H4i has a 0% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1990 Quantum H4i?
The most common MOT failure reasons for a 1990 Quantum H4i are: brake disc or drum excessively weakened, insecure or fractured, emissions levels exceed default limits, seat belt retractor not functioning as intended. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1990 Quantum H4i fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brake disc or drum excessively weakened, insecure or fractured, emissions levels exceed default limits, seat belt retractor not functioning as intended. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1990 Quantum H4is fail their MOT?
Around 100% of 1990 Quantum H4is fail their MOT test, meaning roughly 1 in 1 don't pass first time. The most common reasons are brake disc or drum excessively weakened, insecure or fractured and emissions levels exceed default limits. Pre-checking these items can significantly improve your chances.
What should I check before my 1990 Quantum H4i MOT?
Before your 1990 Quantum H4i MOT, check these commonly-failed items: brake disc or drum excessively weakened, insecure or fractured, emissions levels exceed default limits, seat belt retractor not functioning as intended. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1990 Quantum H4i reliable for MOT?
With a 0% MOT pass rate, the 1990 Quantum H4i performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.