Skip to content
MOTCHECK
Beta

DVSA Statistics

2010 Rewaco Rf1
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2010 Rewaco Rf1 (only 10 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

90%

Pass Rate

Based on 10 DVSA anonymised MOT tests · About this data

Pass Rate

90%

Higher than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

Parts Available

Professional Part

Brakes are a common wear item.

Fixes:Parking brake lever has excessive movement indicating incorrect adjustment
Check Price on Amazon
Trusted RetailerAd / Affiliate Link
  1. 1

    Rear registration plate lamp does not illuminate simultaneously with the position lamps

    25%
  2. 2

    Parking brake lever has excessive movement indicating incorrect adjustment

    25%
  3. 3

    A wheel bearing play so excessive it is likely to break up or directional control impaired

    25%
  4. 4

    Brake performance unable to be tested

    25%

Based on DVSA statistics from 10 recorded tests.

Pre-MOT Checklist for 2010 Rewaco Rf1

Based on common failure points for this model, check these items before your MOT:

  • 1

    Test brakes for effectiveness, pull, and unusual noises when driving

    Brakes – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Rewaco Rf1.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2010 Rewaco Rf1 likely to fail its MOT?

Based on DVSA statistics, the 2010 Rewaco Rf1 has a 90% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.

What are the most common MOT failures on a 2010 Rewaco Rf1?

The most common MOT failure reasons for a 2010 Rewaco Rf1 are: rear registration plate lamp does not illuminate simultaneously with the position lamps, parking brake lever has excessive movement indicating incorrect adjustment, a wheel bearing play so excessive it is likely to break up or directional control impaired. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2010 Rewaco Rf1 fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: rear registration plate lamp does not illuminate simultaneously with the position lamps, parking brake lever has excessive movement indicating incorrect adjustment, a wheel bearing play so excessive it is likely to break up or directional control impaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2010 Rewaco Rf1s fail their MOT?

Around 10% of 2010 Rewaco Rf1s fail their MOT test, meaning roughly 1 in 10 don't pass first time. The most common reasons are rear registration plate lamp does not illuminate simultaneously with the position lamps and parking brake lever has excessive movement indicating incorrect adjustment. Pre-checking these items can significantly improve your chances.

What should I check before my 2010 Rewaco Rf1 MOT?

Before your 2010 Rewaco Rf1 MOT, check these commonly-failed items: rear registration plate lamp does not illuminate simultaneously with the position lamps, parking brake lever has excessive movement indicating incorrect adjustment, a wheel bearing play so excessive it is likely to break up or directional control impaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2010 Rewaco Rf1 reliable for MOT?

With a 90% MOT pass rate, the 2010 Rewaco Rf1 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.