DVSA Statistics
1987 Robin Hood 2 B Plus
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1987 Robin Hood 2 B Plus (only 1 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 1 DVSA anonymised MOT tests · About this data
Pass Rate
0%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Brake light bulbs are easy to replace yourself.
Based on DVSA statistics from 1 recorded tests.
Pre-MOT Checklist for 1987 Robin Hood 2 B Plus
Based on common failure points for this model, check these items before your MOT:
- 1
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 2
Check brake lights illuminate when pedal is pressed - have someone help you check
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Robin Hood 2 B Plus.
Frequently Asked Questions
Is a 1987 Robin Hood 2 B Plus likely to fail its MOT?
Based on DVSA statistics, the 1987 Robin Hood 2 B Plus has a 0% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1987 Robin Hood 2 B Plus?
The most common MOT failure reasons for a 1987 Robin Hood 2 B Plus are: a suspension joint dust cover missing or no longer prevents the ingress of dirt etc, stop lamps remain on when the brakes are released, rate of flashing not between 60 and 120 times per minute. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1987 Robin Hood 2 B Plus fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a suspension joint dust cover missing or no longer prevents the ingress of dirt etc, stop lamps remain on when the brakes are released, rate of flashing not between 60 and 120 times per minute. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1987 Robin Hood 2 B Pluss fail their MOT?
Around 100% of 1987 Robin Hood 2 B Pluss fail their MOT test, meaning roughly 1 in 1 don't pass first time. The most common reasons are a suspension joint dust cover missing or no longer prevents the ingress of dirt etc and stop lamps remain on when the brakes are released. Pre-checking these items can significantly improve your chances.
What should I check before my 1987 Robin Hood 2 B Plus MOT?
Before your 1987 Robin Hood 2 B Plus MOT, check these commonly-failed items: a suspension joint dust cover missing or no longer prevents the ingress of dirt etc, stop lamps remain on when the brakes are released, rate of flashing not between 60 and 120 times per minute. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1987 Robin Hood 2 B Plus reliable for MOT?
With a 0% MOT pass rate, the 1987 Robin Hood 2 B Plus performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.