DVSA Statistics
1987 Robin Hood 2b Super 7
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1987 Robin Hood 2b Super 7 (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1987 Robin Hood 2b Super 7
Based on common failure points for this model, check these items before your MOT:
- 1
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 2
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Robin Hood 2b Super 7.
Frequently Asked Questions
Is a 1987 Robin Hood 2b Super 7 likely to fail its MOT?
Based on DVSA statistics, the 1987 Robin Hood 2b Super 7 has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1987 Robin Hood 2b Super 7?
The most common MOT failure reasons for a 1987 Robin Hood 2b Super 7 are: headlamp aim unable to be tested, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1987 Robin Hood 2b Super 7 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: headlamp aim unable to be tested, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1987 Robin Hood 2b Super 7s fail their MOT?
Around 50% of 1987 Robin Hood 2b Super 7s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are headlamp aim unable to be tested and fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users. Pre-checking these items can significantly improve your chances.
What should I check before my 1987 Robin Hood 2b Super 7 MOT?
Before your 1987 Robin Hood 2b Super 7 MOT, check these commonly-failed items: headlamp aim unable to be tested, fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle.. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1987 Robin Hood 2b Super 7 reliable for MOT?
With a 50% MOT pass rate, the 1987 Robin Hood 2b Super 7 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.