DVSA Statistics
2005 Robin Hood 2b
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2005 Robin Hood 2b (only 8 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 8 DVSA anonymised MOT tests · About this data
Pass Rate
87.5%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Indicator bulbs are quick and cheap to replace.
Based on DVSA statistics from 8 recorded tests.
Pre-MOT Checklist for 2005 Robin Hood 2b
Based on common failure points for this model, check these items before your MOT:
- 1
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
- 2
Test all indicators flash at the correct rate - check front, rear, and side repeaters
Lighting – Common fail on this model
- 3
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Robin Hood 2b.
Frequently Asked Questions
Is a 2005 Robin Hood 2b likely to fail its MOT?
Based on DVSA statistics, the 2005 Robin Hood 2b has a 87.5% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 2005 Robin Hood 2b?
The most common MOT failure reasons for a 2005 Robin Hood 2b are: emissions levels exceed default limits, indicator or hazard warning switch does not operate in accordance with the requirements, actuator insecure or inadequately mounted and braking performance not affected. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2005 Robin Hood 2b fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: emissions levels exceed default limits, indicator or hazard warning switch does not operate in accordance with the requirements, actuator insecure or inadequately mounted and braking performance not affected. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2005 Robin Hood 2bs fail their MOT?
Around 13% of 2005 Robin Hood 2bs fail their MOT test, meaning roughly 1 in 8 don't pass first time. The most common reasons are emissions levels exceed default limits and indicator or hazard warning switch does not operate in accordance with the requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 2005 Robin Hood 2b MOT?
Before your 2005 Robin Hood 2b MOT, check these commonly-failed items: emissions levels exceed default limits, indicator or hazard warning switch does not operate in accordance with the requirements, actuator insecure or inadequately mounted and braking performance not affected. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2005 Robin Hood 2b reliable for MOT?
With a 87.5% MOT pass rate, the 2005 Robin Hood 2b performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.