DVSA Statistics
2016 Robin Hood 2b
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 2016 Robin Hood 2b (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 2016 Robin Hood 2b
Based on common failure points for this model, check these items before your MOT:
- 1
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
- 2
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
- 3
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Robin Hood 2b.
Frequently Asked Questions
Is a 2016 Robin Hood 2b likely to fail its MOT?
Based on DVSA statistics, the 2016 Robin Hood 2b has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 2016 Robin Hood 2b?
The most common MOT failure reasons for a 2016 Robin Hood 2b are: a headlamp or light source missing, inoperative or more than â½ not functioning in the case of led, number plate does not conform to the specified requirements, exhaust noise levels in excess of those permitted. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 2016 Robin Hood 2b fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a headlamp or light source missing, inoperative or more than â½ not functioning in the case of led, number plate does not conform to the specified requirements, exhaust noise levels in excess of those permitted. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 2016 Robin Hood 2bs fail their MOT?
Around 50% of 2016 Robin Hood 2bs fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a headlamp or light source missing, inoperative or more than â½ not functioning in the case of led and number plate does not conform to the specified requirements. Pre-checking these items can significantly improve your chances.
What should I check before my 2016 Robin Hood 2b MOT?
Before your 2016 Robin Hood 2b MOT, check these commonly-failed items: a headlamp or light source missing, inoperative or more than â½ not functioning in the case of led, number plate does not conform to the specified requirements, exhaust noise levels in excess of those permitted. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 2016 Robin Hood 2b reliable for MOT?
With a 50% MOT pass rate, the 2016 Robin Hood 2b performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.