Skip to content
MOTCHECK
Beta

DVSA Statistics

2005 Robin Hood Kit Kar
MOT Pass Rate & Pre-MOT Checklist

There isn't much MOT data yet for the 2005 Robin Hood Kit Kar (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.

50%

Pass Rate

Based on 2 DVSA anonymised MOT tests · About this data

Pass Rate

50%

Lower than average

Limited data available for this model; results may be less representative.

Top Failure Reasons

Common MOT failures for this model

  1. 1

    A suspension component excessively damaged or corroded

    33.3%
  2. 2

    A suspension pin, bush or joint excessively worn

    22.2%
  3. 3

    Fuel system leaking, or missing or ineffective filler cap

    11.1%
  4. 4

    Fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users

    11.1%
  5. 5

    Play in steering rack inner joint(s)

    11.1%

Based on DVSA statistics from 2 recorded tests.

Pre-MOT Checklist for 2005 Robin Hood Kit Kar

Based on common failure points for this model, check these items before your MOT:

  • 1

    Listen for knocks or clunks when driving over bumps - bounce each corner

    Suspension – Common fail on this model

  • 2

    Check for excessive play in steering wheel - should be minimal free movement

    Steering – Common fail on this model

Personal Check

Do you own this car?

Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Robin Hood Kit Kar.

GB

Enter the reg exactly as it appears on the plate.

Frequently Asked Questions

Is a 2005 Robin Hood Kit Kar likely to fail its MOT?

Based on DVSA statistics, the 2005 Robin Hood Kit Kar has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.

What are the most common MOT failures on a 2005 Robin Hood Kit Kar?

The most common MOT failure reasons for a 2005 Robin Hood Kit Kar are: a suspension component excessively damaged or corroded, a suspension pin, bush or joint excessively worn, fuel system leaking, or missing or ineffective filler cap. Many of these can be checked and fixed before your test to improve your chances of passing.

How can I reduce the chance my 2005 Robin Hood Kit Kar fails its MOT?

To improve your chances of passing, check the items that commonly fail on this model: a suspension component excessively damaged or corroded, a suspension pin, bush or joint excessively worn, fuel system leaking, or missing or ineffective filler cap. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.

How many 2005 Robin Hood Kit Kars fail their MOT?

Around 50% of 2005 Robin Hood Kit Kars fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are a suspension component excessively damaged or corroded and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.

What should I check before my 2005 Robin Hood Kit Kar MOT?

Before your 2005 Robin Hood Kit Kar MOT, check these commonly-failed items: a suspension component excessively damaged or corroded, a suspension pin, bush or joint excessively worn, fuel system leaking, or missing or ineffective filler cap. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.

Is the 2005 Robin Hood Kit Kar reliable for MOT?

With a 50% MOT pass rate, the 2005 Robin Hood Kit Kar performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.