DVSA Statistics
1998 Robin Hood S3
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1998 Robin Hood S3 (only 2 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 2 DVSA anonymised MOT tests · About this data
Pass Rate
50%
Lower than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Number plate lights are a quick fix.
Based on DVSA statistics from 2 recorded tests.
Pre-MOT Checklist for 1998 Robin Hood S3
Based on common failure points for this model, check these items before your MOT:
- 1
Ensure number plate lights work and plates are clean and legible
Lighting – Common fail on this model
- 2
Check wiper blades for wear, cracks, and smearing - replace if damaged
Visibility – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Robin Hood S3.
Frequently Asked Questions
Is a 1998 Robin Hood S3 likely to fail its MOT?
Based on DVSA statistics, the 1998 Robin Hood S3 has a 50% MOT pass rate. This is below average, so extra pre-MOT checks are recommended.
What are the most common MOT failures on a 1998 Robin Hood S3?
The most common MOT failure reasons for a 1998 Robin Hood S3 are: number plate does not conform to the specified requirements, wiper blade defective. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1998 Robin Hood S3 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: number plate does not conform to the specified requirements, wiper blade defective. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1998 Robin Hood S3s fail their MOT?
Around 50% of 1998 Robin Hood S3s fail their MOT test, meaning roughly 1 in 2 don't pass first time. The most common reasons are number plate does not conform to the specified requirements and wiper blade defective. Pre-checking these items can significantly improve your chances.
What should I check before my 1998 Robin Hood S3 MOT?
Before your 1998 Robin Hood S3 MOT, check these commonly-failed items: number plate does not conform to the specified requirements, wiper blade defective. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1998 Robin Hood S3 reliable for MOT?
With a 50% MOT pass rate, the 1998 Robin Hood S3 performs below average compared to typical vehicles. Extra attention to pre-MOT checks is recommended for this model.