DVSA Statistics
1997 Rover 220
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1997 Rover 220 (only 18 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 18 DVSA anonymised MOT tests · About this data
Pass Rate
83.3%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Quick DIY Fix
Headlight bulbs are a common MOT fail. Easy DIY replacement.
Based on DVSA statistics from 18 recorded tests.
Pre-MOT Checklist for 1997 Rover 220
Based on common failure points for this model, check these items before your MOT:
- 1
Visually inspect coil springs for cracks or broken coils
Suspension – Common fail on this model
- 2
Test all headlights work and aim is correct - check for condensation inside
Lighting – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Rover 220.
Frequently Asked Questions
Is a 1997 Rover 220 likely to fail its MOT?
Based on DVSA statistics, the 1997 Rover 220 has a 83.3% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1997 Rover 220?
The most common MOT failure reasons for a 1997 Rover 220 are: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a spring or spring component fractured or seriously weakened, the aim of a headlamp is not within limits laid down in the requirements. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1997 Rover 220 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a spring or spring component fractured or seriously weakened, the aim of a headlamp is not within limits laid down in the requirements. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1997 Rover 220s fail their MOT?
Around 17% of 1997 Rover 220s fail their MOT test, meaning roughly 1 in 6 don't pass first time. The most common reasons are the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired and a spring or spring component fractured or seriously weakened. Pre-checking these items can significantly improve your chances.
What should I check before my 1997 Rover 220 MOT?
Before your 1997 Rover 220 MOT, check these commonly-failed items: the strength or continuity of the load bearing structure within 30cm of any seat belt anchorage (a 'prescribed area') is significantly reduced or inadequately repaired, a spring or spring component fractured or seriously weakened, the aim of a headlamp is not within limits laid down in the requirements. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1997 Rover 220 reliable for MOT?
With a 83.3% MOT pass rate, the 1997 Rover 220 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.