DVSA Statistics
1983 Rover 3500
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1983 Rover 3500 (only 9 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 9 DVSA anonymised MOT tests · About this data
Pass Rate
88.9%
Higher than average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Based on DVSA statistics from 9 recorded tests.
Pre-MOT Checklist for 1983 Rover 3500
Based on common failure points for this model, check these items before your MOT:
- 1
Visually inspect coil springs for cracks or broken coils
Suspension – Common fail on this model
- 2
Check exhaust for leaks, holes, or excessive corrosion - listen for blowing
Exhaust – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Rover 3500.
Frequently Asked Questions
Is a 1983 Rover 3500 likely to fail its MOT?
Based on DVSA statistics, the 1983 Rover 3500 has a 88.9% MOT pass rate. This is above average, indicating good reliability for a vehicle of this age.
What are the most common MOT failures on a 1983 Rover 3500?
The most common MOT failure reasons for a 1983 Rover 3500 are: a spring or spring component fractured or seriously weakened, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, exhaust system leaking or insecure. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1983 Rover 3500 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: a spring or spring component fractured or seriously weakened, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, exhaust system leaking or insecure. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1983 Rover 3500s fail their MOT?
Around 11% of 1983 Rover 3500s fail their MOT test, meaning roughly 1 in 9 don't pass first time. The most common reasons are a spring or spring component fractured or seriously weakened and the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Pre-checking these items can significantly improve your chances.
What should I check before my 1983 Rover 3500 MOT?
Before your 1983 Rover 3500 MOT, check these commonly-failed items: a spring or spring component fractured or seriously weakened, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired, exhaust system leaking or insecure. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1983 Rover 3500 reliable for MOT?
With a 88.9% MOT pass rate, the 1983 Rover 3500 performs above average compared to typical vehicles. This suggests good overall condition for a vehicle of this age.