DVSA Statistics
1990 Rover 414
MOT Pass Rate & Pre-MOT Checklist
There isn't much MOT data yet for the 1990 Rover 414 (only 10 tests in our DVSA dataset), so these figures are a rough guide. We still highlight common failure items below so you can check before your MOT.
Pass Rate
Based on 10 DVSA anonymised MOT tests · About this data
Pass Rate
70%
About average
Limited data available for this model; results may be less representative.
Top Failure Reasons
Common MOT failures for this model
Parts Available
Brakes are a common wear item.
Based on DVSA statistics from 10 recorded tests.
Pre-MOT Checklist for 1990 Rover 414
Based on common failure points for this model, check these items before your MOT:
- 1
Test brakes for effectiveness, pull, and unusual noises when driving
Brakes – Common fail on this model
- 2
Listen for knocks or clunks when driving over bumps - bounce each corner
Suspension – Common fail on this model
- 3
Ensure engine is at operating temperature before test - take a good run beforehand
Emissions – Common fail on this model
Do you own this car?
Check your specific vehicle for outstanding advisories or recalls. Get a personalized risk report for your exact Rover 414.
Frequently Asked Questions
Is a 1990 Rover 414 likely to fail its MOT?
Based on DVSA statistics, the 1990 Rover 414 has a 70% MOT pass rate. This is about average for vehicles of this age.
What are the most common MOT failures on a 1990 Rover 414?
The most common MOT failure reasons for a 1990 Rover 414 are: brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle., a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Many of these can be checked and fixed before your test to improve your chances of passing.
How can I reduce the chance my 1990 Rover 414 fails its MOT?
To improve your chances of passing, check the items that commonly fail on this model: brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle., a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Use our pre-MOT checklist above to identify potential issues before your test. Many common failures are easy DIY fixes.
How many 1990 Rover 414s fail their MOT?
Around 30% of 1990 Rover 414s fail their MOT test, meaning roughly 1 in 3 don't pass first time. The most common reasons are brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle. and a suspension pin, bush or joint excessively worn. Pre-checking these items can significantly improve your chances.
What should I check before my 1990 Rover 414 MOT?
Before your 1990 Rover 414 MOT, check these commonly-failed items: brakes imbalance across an axle such that the braking effort from any wheel is less than 70% of the maximum effort recorded from the other wheel on the same axle., a suspension pin, bush or joint excessively worn, the strength or continuity of the load bearing structure within 30cm of any sub-frame, spring or suspension component mounting (a 'prescribed area') is significantly reduced or inadequately repaired. Most are visual checks you can do at home – look for worn tyres, test all lights work, and check for obvious damage or leaks.
Is the 1990 Rover 414 reliable for MOT?
With a 70% MOT pass rate, the 1990 Rover 414 performs about average compared to typical vehicles. This is typical performance for vehicles in this age bracket.